Aqua Cat is now CreekWell. Aqua Cat’s old number, 480-228-8282, still reaches Neil. Booking repairs and emergencies under $1,000 now. Whole-house systems wait for the contractor licenses. Whole-house work waits for the licenses. Join the list

Light-Commercial Grade for Large Homes

Whole-home reverse osmosis

RO water at every tap in the house. The Lion Package is a light-commercial RO system for large homes — about 2,000 gallons a day, a storage tank and a delivery pump. It is a big system with real trade-offs, and this page lists them.

The system

CreekWell Whole-Home RO — light-commercial grade

The machine at the heart of the Lion Package is the AdvanTech Aqua AES-2000, a light-commercial reverse osmosis unit from AdvanTech Aqua of Murrieta, California, bought through CreekWell’s wholesale supplier. It is for homes where the owner wants RO water at every tap — not just at the kitchen sink.

In plain terms: it makes about a gallon and a third of purified water a minute into a storage tank, and a pump sends that stored water to the whole house. Most homes do not need that — the question “Is this overkill for a house?” near the bottom of this page is answered.

  • Light-commercial scale — designed for large homes (4,000+ sq ft) and high demand.
  • Stainless steel membrane housings and an IP65 inlet solenoid (sealed against dust and water jets).
  • A low-lead brass vane pump on a ¾-horsepower motor (AdvanTech).
  • A dual TDS meter shows total dissolved solids going in and coming out.
  • 98.5% nominal rejection of dissolved solids at AdvanTech’s test conditions, before the neutralizer adds some minerals back.

Four things to know before you buy one

  • It sends about as much water to the drain as it makes — 50% recovery. On a well, the well supplies both; on septic, the septic takes the reject water.
  • It wants softened water. AdvanTech rates it on softened feed, and hard Arizona water scales RO membranes. A softener ahead of it is usually needed and is not in this package.
  • RO water is corrosive. The Water Quality Association says plumbing after a whole-house RO should be plastic, not copper. The package includes a pH neutralizer.
  • It needs power and a doorway. The RO draws 11 amps at 110 volts (AdvanTech) and the delivery pump up to 9.6 amps at 115 volts (DAB) — plan on separate circuits (not included). The pump needs power, so in a power cut the house has little or no water pressure unless a bypass is fitted. A 300-gallon tank is about 35″ across and will not pass a 30″ door.

The Lion’s full spec sheet has every figure and its source.

Part AES200010 (110V) · the two-year workmanship warranty on the install. AdvanTech publishes no system warranty; the controller carries 1 year, the DAB pump 2 (limited), the Norwesco tank 3, and the pH neutralizer’s mineral tank 10, with its media and parts 1 (the supplier). Piping ahead of the RO is copper or PEX-A; after it, plastic.

The Complete Package

Everything that arrives on install day

This is not a box on a pallet. It is a commissioned system — equipment, storage, pump, plumbing and first-year service, priced as one flat number and put in writing before anything starts, once CreekWell’s contractor licenses are issued.

The machine itself

AdvanTech Aqua AES-2000 · 21¾″ × 25″ × 31″ · 120 lbs · free-standing or wall-mounted

  • About 2,000 gallons per day (1.38 GPM) of RO water at AdvanTech’s test conditions — whole-house, not one faucet.
  • 98.5% nominal rejection across two 100-series 4021 membranes.
  • 304 stainless steel membrane housings — not plastic.
  • A vane pump in low-lead brass, ¾ HP.
  • A dual TDS meter, so you can see it working, in and out.
  • The iControls CHIP computer controller with 5 LED status indicators.
  • Dual 0–100 psi pre-filter gauges; a 0–300 psi pump gauge; permeate, concentrate and recirculation flow meters, with the concentrate recycle valve.
  • An IP65-rated stainless inlet solenoid and a powder-coated aluminum frame.
  • Handles feed water up to 2,000 ppm TDS.

The storage tank — included, sized to your doorways

RO makes water steadily rather than instantly, so a storage tank is what turns it into whole-house pressure on demand. A Norwesco vertical tank is included in the package, not an add-on, and the size is set by the doors it has to pass through:

  • 200 gallons: 30″ diameter × 72″ tall (Norwesco 41856) — it needs a clear opening wider than 30 inches, and a door’s clear opening is a few inches narrower than its size, so measure the narrowest door on the way in.
  • 300 gallons: 35″ × 79″ in Norwesco’s catalog (about 35½″ × 77½″ on its drawing; Norwesco 40213, the size on Neil’s September 2026 supplier quote) — it needs a clear opening of about 36 inches. Full, it weighs about 2,500 lb (our arithmetic), so it needs a firm, level floor.
  • UV-15 stabilised resin, FDA-grade for potable water, vented lid and outlet fitting standard; 120°F maximum and a 3-year replacement warranty (Norwesco).

Need more storage? Norwesco makes larger tanks — 500, 1,000 gallons and up. One is not part of this package’s price; it is priced separately, in writing once the licenses are issued, and whether it can physically reach the install location is checked on the walkthrough, before anything is ordered.

Also in the price

First-year maintenance

Filter changes, membrane check, TDS verification and system service for the first full year — already paid for. No surprise service invoice at month six.

Delivery pump, float switch and neutralizer

A DAB Esybox Mini 3 pump that holds the house pressure you set, a float switch that stops the RO when the tank is full, a pH neutralizer, and the loop plumbing.

The complete Lion package

RO unit, storage tank, delivery pump, float switch, pH neutralizer, the loop plumbing, first-year maintenance.

$14,999.99Reference price · installed, flat

Not bookable yet. This work comes to $1,000 or more, so it waits for CreekWell’s contractor licenses.

Why not yet?

Until its Arizona contractor licenses are issued, CreekWell takes only jobs that come to under $1,000 in all and need no permit and no gas. The price is published so you can plan and compare; it is not an offer, a quote or a bid. What the licenses change

Ask about financing when you call — see the payment options. Every number is written down before work begins.

Specification

Whole-home RO specs

For you, or anyone you ask to check it. The first three lines matter most: how much it makes, how much of the water it takes in comes out as RO water, and the saltiest water it can handle.

On a well, read the second line twice. At 50% recovery, every gallon of RO water sends about a gallon to the drain. That is normal for reverse osmosis, but on a well with a slow recovery rate, or a septic system, it is worth talking through before you buy.

Lion Package whole-home RO specifications
ItemSpecification
Permeate production1.38 GPM (about 2,000 GPD) at 500 ppm TDS, 77°F and softened feed water
Recovery50% of the water it takes in
Max feed TDS2,000 ppm
MembranesTwo 100-series 4021 flat-sheet membranes, 98.5% nominal rejection for the system, before the neutralizer
Membrane housings304 stainless steel
Pump / motorVane pump, low-lead brass, ¾ HP carbonator motor
Pre-filters4.5″ × 20″: 5 micron polypropylene sediment and 10 micron coconut carbon block
MonitoringCHIP controller with 5-LED status · dual TDS meter · pressure gauges · permeate, concentrate and recirculation flow meters
Storage tankNorwesco vertical, 200 gal (30″ × 72″) or 300 gal (35″ × 79″ in the catalog; about 35½″ × 77½″ on the drawing)
Delivery pumpDAB Esybox Mini 3: up to 21 GPM, pressure set 14–80 psi, 850 W
Dimensions / weight21¾″ L × 25″ W × 31″ H · 120 lbs
Electrical110V, 11 amps, single phase (part AES200010, the one quoted; a 220V model is a different part) · plus the delivery pump, up to 9.6 amps at 115V
First-year maintenanceIncluded in the installed price

Sources: AdvanTech Aqua’s AES specification sheet, DAB’s Esybox Mini 3 manual, Norwesco’s 2024 catalog and tank drawing, and Neil’s September 2026 supplier quote. The earlier version of this page described a different AdvanTech model (the AEC-2000); the quote is for the AES-2000.

Countywide

This price is the same anywhere in Yavapai County

On a system this size the value carries the travel, so the installed price does not change with your ZIP code — Prescott, Sedona, Seligman or the far corner of the county, it is the same flat rate. Neil confirms access and timing on the call.

He walks every install personally, with no sales pressure, and tells you whether whole-home RO is right for your home, or whether the $829 under-sink RO and a softener would serve you better.

Questions

Questions people ask Neil

Can you come out right now?

Yes, for repairs and emergencies under $1,000.

Call or text 928-228-5770, Monday to Saturday, 7am to 7pm; a priority call gets a same-day visit when Neil is free. Whole-house systems wait for the contractor licenses (what the licenses change).

Is this overkill for a house?

For many homes, yes — and you will be told so.

This is light-commercial equipment: stainless housings, a commercial vane pump, about 2,000 gallons a day. For a café, salon or office: commercial reverse osmosis. It earns its price in large homes (4,000+ sq ft), houses on well water with high TDS, properties where an under-sink unit cannot keep up, or where somebody wants RO quality at every tap rather than one faucet. If a $829 under-sink RO and a softener would solve your actual problem for a fraction of this, that is the recommendation you will get.

How much does a whole-home reverse osmosis system cost installed?

$14,999.99 flat, installed — The Lion Package, the same anywhere in Yavapai County.

It is a reference price: the Lion is not installed until CreekWell’s contractor licenses are issued.

That price includes the AdvanTech AES-2000 (stainless housings, vane pump, dual TDS meter), a storage tank sized to your doorways, the delivery pump, float switch and pH neutralizer, all parts, the loop plumbing and the first year of maintenance. The system makes about 1.38 GPM (about 2,000 gallons per day) of RO water at AdvanTech’s test conditions, with 98.5% nominal rejection of dissolved solids. Not included: a softener ahead of it (usually needed), the electrical circuits and outlets, replacing copper plumbing after the RO, lab water testing, and septic or drain upgrades, if needed.

What size home does the Whole-Home RO system fit?

Large homes — typically 4,000 sq ft and up — or any home with high water demand.

That means a large family or heavy daily use. It produces about 2,000 gallons per day, and sends about as much to the drain, so it is not a way to fill a pool or pond: that doubles the water used, and on a septic system the reject water goes to the septic tank. For homes under 3,500 sq ft with normal use, the under-sink RO at $829 installed delivers RO drinking water at the kitchen sink for much less; between 3,500 and 4,000 sq ft, it depends on how much water the household uses.

What does the Whole-Home RO actually remove?

About 98.5% of dissolved solids — the nominal rating, at AdvanTech’s test conditions, before the neutralizer adds some minerals back.

RO in general reduces lead, copper, chromium, chloride and sodium, and may also reduce arsenic, fluoride, radium, sulfate and nitrate (CDC). No certification covers a whole-house RO’s contaminant claims — NSF/ANSI 58 is written for under-sink units. The two 100-series 4021 membranes are rated 98.5% nominal for the system. For best results, a softener goes upstream: AdvanTech rates the unit on softened water, and the softener is not in the package. One exception worth knowing on a Yavapai County well: arsenic III has to be converted before any RO membrane catches it well, which the arsenic removal page explains.

Why does a whole-home RO need a storage tank at all?

Because reverse osmosis produces water steadily rather than instantly.

The unit makes about 1.38 gallons a minute — roughly 2,000 gallons a day — which is plenty for a household over 24 hours but not enough to feed three showers at once straight off the membrane. The tank banks that production so the house draws from stored RO water at full pressure whenever it wants it. Without storage you would have RO water and no pressure, which is why systems sold without a tank tend to disappoint.

Is the storage tank really included, or is that extra?

Included — a Norwesco vertical storage tank is part of the installed price, not an add-on.

The size is set by your doorways. The 200-gallon tank measures 30″ in diameter by 72″ tall, so it needs a clear opening wider than 30 inches; a door’s clear opening is a few inches narrower than its size, so measure the narrowest door on the way in. The 300-gallon tank on Neil’s September 2026 supplier quote is about 35½″ across and will not go through a 30″ door. Larger tanks (500, 1,000 gallons and up) are made, but they are not part of this package’s price; whether one fits is assessed on the walkthrough before anything is ordered.

What does the first year of maintenance cover?

Filter changes, membrane inspection, TDS verification in and out, and system service across the first full year — already paid for within the installed price.

RO systems need their pre-filters changed on schedule or membrane life suffers, so covering year one means the maintenance actually happens rather than getting deferred. After the first year you can either book service as needed or arrange an ongoing plan.

What ongoing maintenance does the Whole-Home RO need?

Pre-filters on a schedule set from your TDS and pressure readings, a new membrane every 3–5 years on average, and a yearly check.

The RO membranes average 3–5 years depending on incoming water quality (Virginia Tech Extension). The annual TDS check and pressure calibration take about 30 minutes. Year one — filter changes, membrane check, TDS verification and system service — is included in the installed price. After that, parts and service are priced at the current price when they are due; ask for today’s figures before you buy and you will get them.

Does the CreekWell Whole-Home RO come with a warranty?

The install carries the two-year workmanship warranty.

The equipment carries its makers’ terms: AdvanTech publishes no system warranty; the controller has 1 year, the DAB pump 2 (limited), the Norwesco tank 3, and the pH neutralizer’s mineral tank 10, with its media and parts 1 (the supplier).

If the installation work fails within two years, it is put right free (the terms are on the About page). Membranes average a 3–5 year life depending on water quality (Virginia Tech Extension), and the check-up at the end of the first year monitors TDS and pressure.

How long does installation take?

Plan on 1 to 1.5 days.

Day one, the Whole-Home RO system, the storage tank and the delivery pump go in and the loop plumbing is tied in. Day two, if it is needed, is for electrical inspection or final calibration. The date is set around your household schedule.

What if my loop plumbing run is complicated?

The flat rate covers it either way — you get a written scope before any work starts.

Older Prescott homes with complex routing, slab penetrations, or finished-basement work take longer, and that is on the installer, not on you.

Do you install whole-home RO outside the Prescott area?

Yes, once CreekWell’s contractor licenses are issued — the install travels well inside the county, at the same flat rate as Prescott.

Chino Valley, Paulden, Dewey-Humboldt, Mayer, Sedona, Cottonwood, Camp Verde, Cornville and the outer county all get the same price. Call 928-228-5770 with your address.

The list

Join the list for when the licenses are issued

Whole-house systems and other work of $1,000 or more wait until CreekWell’s contractor licenses are issued. Both license applications are with the Arizona Registrar of Contractors. Once the licenses are issued, Neil calls the list in the order it came in. Joining needs no deposit. Repairs under $1,000 that need no permit can be booked now.

Call Neil 928-228-5770 Join the list